Cone Hatching Barrel

Imported Korean polyethylene (PE) plastic raw materials, rotomolding molding without a bond, not easy to break. Smooth inside and outside, no leakage, no moss, no scaling. The bottom of the barrel is a bottom with a positive cone, and the carbon steel base is matched with the whole. The liquid in the barrel can be cleaned at one time with no residue, easy to clean, good sanitation and acid and alkali corrosion resistance, and light and easy to move.

Product Details

Description:

Size: Diameter: 500mm Height: 1000mm Cover Diameter: 250mm

Imported Korean polyethylene (PE) plastic raw materials, rotomolding molding without a bond, not easy to break. Smooth inside and outside, no leakage, no moss, no scaling. The bottom of the barrel is a bottom with a positive cone, and the carbon steel base is matched with the whole. The liquid in the barrel can be cleaned at one time with no residue, easy to clean, good sanitation and acid and alkali corrosion resistance, and light and easy to move.

Plastic cone hatching is suitable for:

Incubation of freshwater fish, freshwater prawn, marine fish, and mudfish. Can be used for large fry hatchery, shrimp hatchery, ornamental fish hatching base and so on. Mainly suitable for submerged fish eggs.

We only provide plastic buckets, others need customers to go back and refit! Incubation modification requirements:

The fry hatchery adopts a funnel-like design with a large and small funnel. The water inlet is below for easy flushing of eggs that may stick together. At the same time, high dissolved oxygen can be diffused. Pay attention to the need for dissolved oxygen in the incubation process. The water inlet valve is installed to control the flow so as not to cause excessive impact on the fish eggs. The water outlet is on the top, and a filter can be installed on the barrel mouth. The filter cloth can control the density according to own requirements to prevent the fish eggs from being flushed into the water outlet. The cone design facilitates collection of juvenile fish fry. At the same time it will reduce the mortality caused by the collection of juvenile fish. The pipes and inlet pipes for collecting juveniles are controlled with a tee and a valve. The above is for reference only! Customers need to modify according to their own conditions!

 Precautions:

1. If the temperature of the environment or the stored liquid is between 50 and 80 degrees Celsius, the outside jacket of the container is required to be used to make up the jacket.

2. The plastic water tank should be placed on a platform with good stress.

3, the tank is a general force container, so the control level should be equipped with a float or other effective control device.

4, because the PE tank is an atmospheric container. The tank is generally only resistant to atmospheric pressure and does not tolerate air pressure. The tank is not pressurized in a vacuum-tight container.

@~LJI353$~%R_J_GUAL677J_副本.jpg{NP]NU(NOKS_7QKJ9KLI}BC_副本.jpg%Z`41H7IQY5C2PEP})CZBFJ_副本.jpg


Details please contact our sales:dorothea@homdas.com


201710131005392897278.jpg

201710130926254547646.jpg

201710130926444648072.jpg


If you're looking for quality cone hatching barrel, welcome to buy the quality roto mold products made in China from our factory. As a leading manufacturer and supplier of various rotomolding, rotational mould and plastic rolling products in China, we also offer customized service. For price consultation, contact us now.
Inquiry